青铜长老
- 音符
- 0
- 音乐币
- 184433
- 贡献
- 88692
|
Устройство воспроизведения:Music Hall MMF 9.1 TurntableTonearm: Pro-Ject 9cc evo with Pure Silver WiresCartridge: Nagaoka MP-500
Предварительный усилитель:Brocksieper Phonomax (Tube Phono PreAmp)
АЦП:E-MU 0404 external USB 2.0 AudiointerfaceInterconnections: Silent Wire NF 5
Программа-оцифровщик:Wavelab 6.1 recording software
Обработка:
Vacuum cleaning > TT > Brocksieper Phonomax > E-MU 0404 > WaveLab 6 (24/192) > manual click removal >
analyze (no clipping, no DC Bias offset) > converted to 24/96 with iZotope RX Advanced 1.21
> split into individual Tracks > FLAC encoded (Vers. 1.21)
No silence been removed, please burn gapless to match original tracklayout."With my vinyl transfers, I try to catch the whole beauty of vinyl records; therefore I don't use any post-processing or any sound improvement. What you get is a clear and flat transfer. For getting a clear sound, I'll do an extended washing of each record with my RCM, which can take up to 30 minutes brushing on each side. Resistant ticks and clicks I try to remove as good as possible, but the priority is not to lose any musical information in the process. Surface noises, as long they are not too high, are left in place. Only on bad pressings or on records recorded at extremely low levels do I use a fade in-/-out. As John Peel said, "Life is full of surface noises." In some cases this means that I have to make a compromise.... The result has to pass my personal quality criteria, which is IMO quite high" © aksman
Спектр, АЧХ, Уровень записи
LP1:
LP2:
磁力下载(论坛代下载服务):
付费主题
1.22 GB
|
|